summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
Diffstat (limited to 'doc')
-rw-r--r--doc/guix.texi320
1 files changed, 244 insertions, 76 deletions
diff --git a/doc/guix.texi b/doc/guix.texi
index f6476e0d81..dca91dc0c9 100644
--- a/doc/guix.texi
+++ b/doc/guix.texi
@@ -358,6 +358,7 @@ Foreign Architectures
System Configuration
+* Getting Started with the System:: Your first steps.
* Using the Configuration System:: Customizing your GNU system.
* operating-system Reference:: Detail of operating-system declarations.
* File Systems:: Configuring file system mounts.
@@ -2879,8 +2880,8 @@ unless your configuration specifies otherwise
@node After System Installation
@section After System Installation
-Success, you've now booted into Guix System! From then on, you can update the
-system whenever you want by running, say:
+Success, you've now booted into Guix System! You can upgrade the system
+whenever you want by running:
@example
guix pull
@@ -2888,24 +2889,10 @@ sudo guix system reconfigure /etc/config.scm
@end example
@noindent
-This builds a new system generation with the latest packages and services
-(@pxref{Invoking guix system}). We recommend doing that regularly so that
-your system includes the latest security updates (@pxref{Security Updates}).
-
-@c See <https://lists.gnu.org/archive/html/guix-devel/2019-01/msg00268.html>.
-@quotation Note
-@cindex sudo vs. @command{guix pull}
-Note that @command{sudo guix} runs your user's @command{guix} command and
-@emph{not} root's, because @command{sudo} leaves @env{PATH} unchanged. To
-explicitly run root's @command{guix}, type @command{sudo -i guix @dots{}}.
-
-The difference matters here, because @command{guix pull} updates
-the @command{guix} command and package definitions only for the user it is run
-as. This means that if you choose to use @command{guix system reconfigure} in
-root's login shell, you'll need to @command{guix pull} separately.
-@end quotation
+This builds a new system @dfn{generation} with the latest packages and
+services.
-Now, @pxref{Getting Started}, and
+Now, @pxref{Getting Started with the System}, and
join us on @code{#guix} on the Libera Chat IRC network or on
@email{guix-devel@@gnu.org} to share your experience!
@@ -3159,22 +3146,9 @@ sudo guix system reconfigure /etc/config.scm
@end example
Upon completion, the system runs the latest versions of its software
-packages. When you eventually reboot, you'll notice a sub-menu in the
-bootloader that reads ``Old system generations'': it's what allows you
-to boot @emph{an older generation of your system}, should the latest
-generation be ``broken'' or otherwise unsatisfying. Just like for
-packages, you can always @emph{roll back} to a previous generation
-@emph{of the whole system}:
-
-@example
-sudo guix system roll-back
-@end example
-
-There are many things you'll probably want to tweak on your system:
-adding new user accounts, adding new system services, fiddling with the
-configuration of those services, etc. The system configuration is
-@emph{entirely} described in the @file{/etc/config.scm} file.
-@xref{Using the Configuration System}, to learn how to change it.
+packages. Just like for packages, you can always @emph{roll back} to a
+previous generation @emph{of the whole system}. @xref{Getting Started
+with the System}, to learn how to manage your system.
Now you know enough to get started!
@@ -3283,7 +3257,7 @@ out to have a serious bug, users may roll back to the previous instance
of their profile, which was known to work well. Similarly, the global
system configuration on Guix is subject to
transactional upgrades and roll-back
-(@pxref{Using the Configuration System}).
+(@pxref{Getting Started with the System}).
All packages in the package store may be @emph{garbage-collected}.
Guix can determine which packages are still referenced by user
@@ -17101,6 +17075,7 @@ instantiated. Then we show how this mechanism can be extended, for
instance to support new system services.
@menu
+* Getting Started with the System:: Your first steps.
* Using the Configuration System:: Customizing your GNU system.
* operating-system Reference:: Detail of operating-system declarations.
* File Systems:: Configuring file system mounts.
@@ -17121,14 +17096,222 @@ instance to support new system services.
* Defining Services:: Adding new service definitions.
@end menu
+@node Getting Started with the System
+@section Getting Started
+
+@cindex system configuration file
+@cindex configuration file, of the system
+You're reading this section probably because you have just installed
+Guix System (@pxref{System Installation}) and would like to know where
+to go from here. If you're already familiar with GNU/Linux system
+administration, the way Guix System is configured is very different from
+what you're used to: you won't install a system service by running
+@command{guix install}, you won't configure services by modifying files
+under @file{/etc}, and you won't create user accounts by invoking
+@command{useradd}; instead, all these aspects are spelled out in a
+@dfn{system configuration file}.
+
+The first step with Guix System is thus to write the @dfn{system
+configuration file}; luckily, system installation already generated one
+for you and stored it under @file{/etc/config.scm}.
+
+@quotation Note
+You can store your system configuration file anywhere you like---it
+doesn't have to be at @file{/etc/config.scm}. It's a good idea to keep
+it under version control, for instance in a
+@uref{https://git-scm.com/book/en/, Git repository}.
+@end quotation
+
+The @emph{entire} configuration of the system---user accounts, system
+services, timezone, locale settings---is declared in this file, which
+follows this template:
+
+@lisp
+(use-modules (gnu))
+(use-package-modules @dots{})
+(use-service-modules @dots{})
+
+(operating-system
+ (host-name @dots{})
+ (timezone @dots{})
+ (locale @dots{})
+ (bootloader @dots{})
+ (file-systems @dots{})
+ (users @dots{})
+ (packages @dots{})
+ (services @dots{}))
+@end lisp
+
+This configuration file is in fact a Scheme program; the first lines
+pull in modules providing variables you might need in the rest of the
+file---e.g., packages, services, etc. The @code{operating-system} form
+declares the system configuration as a @dfn{record} with a number of
+@dfn{fields}. @xref{Using the Configuration System}, to view complete
+examples and learn what to put in there.
+
+The second step, once you have this configuration file, is to test it.
+Of course, you can skip this step if you're feeling lucky---you choose!
+To do that, pass your configuration file to @command{guix system vm} (no
+need to be root, you can do that as a regular user):
+
+@example
+guix system vm /etc/config.scm
+@end example
+
+@noindent
+This command returns the name of a shell script that starts a virtual
+machine (VM) running the system @emph{as described in the configuration
+file}:
+
+@example
+/gnu/store/@dots{}-run-vm.sh
+@end example
+
+@noindent
+In this VM, you can log in as @code{root} with no password. That's a
+good way to check that your configuration file is correct and that it
+gives the expected result, without touching your system. @xref{Invoking
+guix system}, for more information.
+
+@quotation Note
+When using @command{guix system vm}, aspects tied to your hardware such
+as file systems and mapped devices are overridden because they cannot be
+meaningfully tested in the VM@. Other aspects such as static network
+configuration (@pxref{Networking Setup,
+@code{static-networking-service-type}}) are @emph{not} overridden but
+they may not work inside the VM@.
+@end quotation
+
+@cindex system instantiation
+@cindex reconfiguring the system
+The third step, once you're happy with your configuration, is to
+@dfn{instantiate} it---make this configuration effective on your system.
+To do that, run:
+
+@example
+sudo guix system reconfigure /etc/config.scm
+@end example
+
+@cindex upgrading system services
+@cindex system services, upgrading
+@noindent
+This operation is @dfn{transactional}: either it succeeds and you end up
+with an upgraded system, or it fails and nothing has changed. Note that
+it does @emph{not} restart system services that were already running.
+Thus, to upgrade those services, you have to reboot or to explicitly
+restart them; for example, to restart the secure shell (SSH) daemon, you
+would run:
+
+@example
+sudo herd restart sshd
+@end example
+
+@quotation Note
+System services are managed by the Shepherd (@pxref{Jump Start,,,
+shepherd, The GNU Shepherd Manual}). The @code{herd} command lets you
+inspect, start, and stop services. To view the status of services, run:
+
+@example
+sudo herd status
+@end example
+
+To view detailed information about a given service, add its name to the
+command:
+
+@example
+sudo herd status sshd
+@end example
+
+@xref{Services}, for more information.
+@end quotation
+
+@cindex provenance, of the system
+The system records its @dfn{provenance}---the configuration file and
+channels that were used to deploy it. You can view it like so:
+
+@example
+guix system describe
+@end example
+
+Additionally, @command{guix system reconfigure} preserves previous
+system generations, which you can list:
+
+@example
+guix system list-generations
+@end example
+
+@noindent
+@cindex roll back, for the system
+Crucially, that means that you can always @emph{roll back} to an earlier
+generation should something go wrong! When you eventually reboot,
+you'll notice a sub-menu in the bootloader that reads ``Old system
+generations'': it's what allows you to boot @emph{an older generation of
+your system}, should the latest generation be ``broken'' or otherwise
+unsatisfying. You can also ``permanently'' roll back, like so:
+
+@example
+sudo guix system roll-back
+@end example
+
+@noindent
+Alternatively, you can use @command{guix system switch-generation} to
+switch to a specific generation.
+
+Once in a while, you'll want to delete old generations that you do not
+need anymore to allow @dfn{garbage collection} to free space
+(@pxref{Invoking guix gc}). For example, to remove generations older
+than 4 months, run:
+
+@example
+sudo guix system delete-generations 4m
+@end example
+
+From there on, anytime you want to change something in the system
+configuration, be it adding a user account or changing parameters of a
+service, you will first update your configuration file and then run
+@command{guix system reconfigure} as shown above.
+@cindex upgrade, of the system
+Likewise, to @emph{upgrade} system software, you first fetch an
+up-to-date Guix and then reconfigure your system with that new Guix:
+
+@example
+guix pull
+sudo guix system reconfigure /etc/config.scm
+@end example
+
+@noindent
+We recommend doing that regularly so that your system includes the
+latest security updates (@pxref{Security Updates}).
+
+@c See <https://lists.gnu.org/archive/html/guix-devel/2019-01/msg00268.html>.
+@quotation Note
+@cindex sudo vs. @command{guix pull}
+@command{sudo guix} runs your user's @command{guix} command and
+@emph{not} root's, because @command{sudo} leaves @env{PATH} unchanged.
+
+The difference matters here, because @command{guix pull} updates
+the @command{guix} command and package definitions only for the user it is run
+as. This means that if you choose to use @command{guix system reconfigure} in
+root's login shell, you'll need to @command{guix pull} separately.
+@end quotation
+
+That's it! If you're getting starting with Guix entirely,
+@pxref{Getting Started}. The next sections dive in more detail into the
+crux of the matter: system configuration.
+
@node Using the Configuration System
@section Using the Configuration System
+The previous section showed the overall workflow you would follow when
+administering a Guix System machine (@pxref{Getting Started with the
+System}). Let's now see in more detail what goes into the system
+configuration file.
+
The operating system is configured by providing an
@code{operating-system} declaration in a file that can then be passed to
-the @command{guix system} command (@pxref{Invoking guix system}). A
-simple setup, with the default Linux-Libre
-kernel, initial RAM disk, and a couple of system services added to those
+the @command{guix system} command (@pxref{Invoking guix system}), as
+we've seen before. A simple setup, with the default Linux-Libre kernel,
+initial RAM disk, and a couple of system services added to those
provided by default looks like this:
@findex operating-system
@@ -17136,8 +17319,8 @@ provided by default looks like this:
@include os-config-bare-bones.texi
@end lisp
-The configuration is declarative and hopefully mostly self-describing.
-It is actually code in the Scheme programming language; the whole
+The configuration is declarative.
+It is code in the Scheme programming language; the whole
@code{(operating-system @dots{})} expression produces a @dfn{record}
with a number of @dfn{fields}.
Some of the fields defined
@@ -17146,16 +17329,21 @@ Others, such as @code{packages} and @code{services}, can be omitted, in
which case they get a default value. @xref{operating-system Reference},
for details about all the available fields.
-Below we discuss the effect of some of the most important fields,
-and how to @dfn{instantiate} the operating system using
-@command{guix system}.
+Below we discuss the meaning of some of the most important fields.
-@quotation Do not panic
-@cindex Scheme programming language, getting started
-Intimidated by the Scheme language or curious about it? The Cookbook
-has a short section to get started that explains the fundamentals, which
-you will find helpful when hacking your configuration. @xref{A Scheme
-Crash Course,,, guix-cookbook, GNU Guix Cookbook}.
+@quotation Troubleshooting
+The configuration file is a Scheme program and you might get the syntax
+or semantics wrong as you get started. Syntactic issues such as
+misplaced parentheses can often be identified by reformatting your file:
+
+@example
+guix style -f config.scm
+@end example
+
+The Cookbook has a short section to get started with the Scheme
+programming language that explains the fundamentals, which you will find
+helpful when hacking your configuration. @xref{A Scheme Crash Course,,,
+guix-cookbook, GNU Guix Cookbook}.
@end quotation
@unnumberedsubsec Bootloader
@@ -17350,16 +17538,13 @@ Alternatively, the @code{modify-services} macro can be used:
@unnumberedsubsec Instantiating the System
+@cindex system instantiation
+@cindex reconfiguring the system
Assuming the @code{operating-system} declaration
-is stored in the @file{my-system-config.scm}
-file, the @command{guix system reconfigure my-system-config.scm} command
-instantiates that configuration, and makes it the default GRUB boot
-entry (@pxref{Invoking guix system}).
-
-@quotation Note
-We recommend that you keep this @file{my-system-config.scm} file safe
-and under version control to easily track changes to your configuration.
-@end quotation
+is stored in the @file{config.scm}
+file, the @command{sudo guix system reconfigure config.scm} command
+instantiates that configuration, and makes it the default boot
+entry. @xref{Getting Started with the System}, for an overview.
The normal way to change the system configuration is by updating this
file and re-running @command{guix system reconfigure}. One should never
@@ -17369,23 +17554,6 @@ fact, you must avoid that since that would not only void your warranty
but also prevent you from rolling back to previous versions of your
system, should you ever need to.
-@cindex roll-back, of the operating system
-Speaking of roll-back, each time you run @command{guix system
-reconfigure}, a new @dfn{generation} of the system is created---without
-modifying or deleting previous generations. Old system generations get
-an entry in the bootloader boot menu, allowing you to boot them in case
-something went wrong with the latest generation. Reassuring, no? The
-@command{guix system list-generations} command lists the system
-generations available on disk. It is also possible to roll back the
-system via the commands @command{guix system roll-back} and
-@command{guix system switch-generation}.
-
-Although the @command{guix system reconfigure} command will not modify
-previous generations, you must take care when the current generation is not
-the latest (e.g., after invoking @command{guix system roll-back}), since
-the operation might overwrite a later generation (@pxref{Invoking guix
-system}).
-
@unnumberedsubsec The Programming Interface
At the Scheme level, the bulk of an @code{operating-system} declaration